Application areas
Suitable for flow measurement of liquids with conductivity higher than 20 uS/cm.
Electromagnetic flowmeter. Modular design in compact and separate version. Readings are independent of density, viscosity, temperature and liquid pressure. Without moving elements and with a low pressure drop. Suitable for liquids with solids. High chemical resistance. Can be installed in any position, provided that the pipe is always full (in vertical pipes upwards flow is recommended). Low power consumption.
Output 4-20 mA /0 … 1000 Hz.
Totalizer, Flow indication, Batching
Measuring range 10 l/h … 7000 m3/h H2O
Accuracy =±0,5% f.e.
Connections
Materials
Options
Suitable for flow measurement of liquids such as sea water, kerosene, gas-oil, petrol, oils.
Non-invasive ultrasonic flowmeter, with the transducers installed outside the pipe. Suitable for horizontal and vertical pipes. Easy to install, without interruptions in the manufacturing process. No pressure drop and low maintenance. Good performance with liquids with suspended solids. Straight pipe run of 5 x DN before and after the flowmeter.
Flow rate and speed indication and volume totalizer.
4-20 mA analog output
Alarm outputs.
Accuracy ± 1,5% reading value ± 0,02 m/s
Repeatibility ± 0,25% reading value ± 0,01 m/s
Flow speed range 0,2 …12 m/s
Power supply 85 … 265 VAC 50, 60 Hz
Diameters DN80 … DN2000
Ingress protection IP65
Connections “Clamp on”, external mounting on pipe
Materials Transducers material: Aluminium + PEEK Converter material: ABS
Temperature range -20 … +80ºC
